Direct Current (DC) Surge Protection Devices
ProS DC Series
The Protec ProS DC series of surge protective device
offers the best combined method of transient protection.
This series offers Frequency Responsive Circuitry FRC
protection which tracks and clamps transients on sine
wave resulting in lower let-through voltages and a greater
level of protection. These devices are intended for a single
12, 24, 48, 75, 95, 110, 130, 200VDC circuit application
at locations feeding sensitive / critical equipment. All
models are related with a robust 10kA per mode surge
current rating. The PTS-DC series is designed as a stand
alone device that requires no special external enclosure.
Most voltage are available with either wired or terminal
connections.
Model Available
» ProS-T/W-12VDC 2 wire + ground 10VAC/15VDC 85V
» ProS-T/W-24VDC 2 wire + ground 15VAC/30VDC 105V
» ProS-T/W-48VDC 2 wire + ground 40VAC/56VDC 180V
» ProS-T/W-75VDC 2 wire + ground 60VAC/85VDC 250V
» ProS-T/W-95VDC 2 wire + ground 75VAC/100VDC 300V
» ProS-T/W-110VDC 2 wire + ground 95VAC/125VDC 350V
» ProS-T/W-130VDC 2 wire + ground 115VAC/150VDC 400V
» ProS-T/W-200VDC 2 wire + ground 230VAC/275VDC 550V
Applications
Ideal for DC power supply application environement that depend on reliable operations of their computer system
and entwork for their day to day operations, such as ;
» Small Businesses
» Office Buildings
» Banks
» Retail Stores
» Restaurants
» Gas Stations and Fuel Depots
» Office Complexes
» Detection and Control Circuits
» Churches
Key Features
» Discrete "All Mode" circuitry
» Independent verification of performance and safety
» Blue LED indication to indicated protection status per phase
» Component level, over temperature fusing
» Multi-stage hybrid frequency responsive circuitry
» Circuit encapsulation for safety and performance
General Product Specification
» EEE-C62.41.1 & C62.41.2-2002 environments:
Suitable for DC power supply
» IEC Environments:
Suitable for use in IEC 61643-11 environment
» CE environment:
Mains Terminals Disturbance Voltage, 9kHz to 30MHz
Radiated Emissions 30MHz to 300MHz
Electrostatic Discharge
IEC 61000-6-3: 2006
EN 61000-6-3: 2007
Electric Fast Transients, Surge, Power Frequency Magnetic
Field, Dips
Test Method, IEC 61000-4-6: 2008, EN 61000-4-6: 2009
Test Requirement, IEC 61000-6-1: 2005
EN 61000-6-1: 2007
General Description:
Series connected Surge Protective Device with Encapsulation Technology, Sinewave Tracking Circuitry (STC), 20Ka per mode / 60kA total peak surge current for virtual elimination of ringwave type transients.
Application:
Designed for use at ANSI / IEEE Categories A, B, and C with susceptibility up to all exposure levels to protect sensitive/critical loads fed by a single electrical circuit.
Circuit Design:
Series connected hybrid design incorporating discrete
all mode protection and utilizing encapsulated Sinewave
Tracking Circutiry ( STC ) design to provide lowest possible
let-through voltages. All suppression circuits are encapsulated
in high dielectric compound to promote long component life
and protection from the environment and/or vibration. All
circuits include component level and thermal fusing.
Current & Voltage Configuration:
15 Amps with various models up to 480VAC
Protection Modes:
Dedicated protection circuitry for every possible mode.
Normal Mode +ve to -ve
Common Mode +ve to G, -ve to G
Frequency: 50 - 400Hz
Temperature Rating: Up to 176°C (80°C)
Standard Enclosure: Plastic, UL 94V-5VA (highest fire rating)
Temperature Rating: Blue LED indication, normally on
Circuit Interrupt: Internal component level thermal fusing
Contact Us
Disclaimer: Protec Power Solutions shall not be liable for errors due to printing and online contents. The content of data sheets and products specifications may change as the company is always in the process of improving the products and marketing material.